Husqvarna 1830EXL 30″ 414cc Crown Series 2 Stage Snow Blower

If you are a homeowner looking for the perfect snow blower for heavy duty projects, look no further than the Husqvarna 1830EXL 30” 414cc Crown Series 2 Stage Snow Blower. This snow blower is second to none in terms of durability, efficiency, and ability to clear large loads of snow and ice debris in very little time. Also, the 1830EXL is designed with many contingency plans in mind. For example, if you have a dead battery in the middle of a snowstorm, you probably will be in the middle of quite a conundrum. However this model  snow blower allows you to connect to an electric outlet just for enough time that allows you to utilize the push button starter.

Next, the 1830EXL is set up for heavy duty operation. For instance, if most snow blowers can cut a swath of up to 24” then the 1830EXL is set up for approximately 30 inches per pass. This is a 6 inch differential that adds up to one foot per pass, and can amount to many more over the width of an entire area. Also, most snow blowers require multiple passes to clear areas that are deeply covered. The regular statistics for standard snow blowers are approximately 15” per pass, but the 1830EXL can clear up to 23 inches per pass, which is a remarkable feat given the differential and the amount of snow it can process in a very short period of time.

Nest, the 1830EXL comes equipped with a two stage snow clearing procedure. This means that an impeller assists the auger in making sure that snow is fed through the housing at the fastest rate. In ordinary snow blowers, it is common that the auger is the only machinery that feeds the snow into the housing. This results in a slower clearing rate. However, the revolutionary impeller working in combination with the auger allows the snow to be pulled in conjunction with the auger. The result? A much faster clearing rate, which allows for the bigger housing, the deeper reach, and the overall better performance.

Comments are closed.